Release Notes - A4400 VA4 Pro / Virtual Unit

Version 2.58

May 16, 2017

  • Time synchro averaging for spectra (see manual The Analyzer Mode/New Meas creation/New Advanced/Averaging)
  • Ampl Tacho (see manual Global Properties/Trigger Settings/Use Ampl Tacho)
  • You can turn on/off orders in filtered orbit (see manual Analyzer/Filtered Orbit Measurement)

Version 2.57

March 23, 2017

  • Order spectrum (Analyzer/Order spectrum)
  • FFT output normalization - power spectrum, power spectral density, ... (Analyzer/Graph Properties/FFT Output)
  • PAS (=Phase Assigned Spectrum) as FRF result (Analyzer/New Mead Creation/New Advanced)
  • "Manual Entry" parameter in DC measurement (Analyzer/DC measurement)
  • A4410 installer

Version 2.56

January 6, 2017

  • Filtered orbit measurement (Analyzer/Filtered Orbit Measurement)
  • Ultrasound measurement (Analyzer/Ultrasound)
  • Circular view for time waveform (Analyzer/Graph Properties/View (time waveform)

Version 2.55

December 6, 2016

  • Export to wav Settings (Recorder/Editing of Record)
  • Min speed (Sensors properies/Tacho)

Version 2.54

November 4, 2016

  • Minor fixes

Version 2.53

October 26, 2016

  • Ultrasound Module
  • Route sensors checking (menu Global/Global Settings/Check Route Sensors)
  • Cursor on spectrograph
  • Tacho marks in orbit graph

Version 2.52

September 22, 2016

  • New notes format
  • Settling Prolongation (Sensors/Settling Prolongation)
  • Balancer: negative value of trial mass enabled (removing mass)
  • Bumptest: integration in spectrum
  • Route creation in instrument

Version 2.51

June 20, 2016

  • Averaging types for static values (linear, maximum, minimum, median)
  • Reference spectrum drawed bellow signal

Version 2.50

June 3, 2016

  • Faster saving data in route

Version 2.49

April 26, 2016

  • New appearance of FASIT
  • FASIT as meas type

Version 2.48

April 5, 2016

  • Variable Speed Detection
  • True and Scaled detect types

Version 2.47

February 11, 2016

  • Appearance dialog (Global/Appearance)

Version 2.46

September 29, 2015

  • New skin

Version 2.45

August 25, 2015

  • Manualy entered speed valid for whole route

Version 2.44

August 20, 2015

  • Minor fixes

Version 2.43

August 14, 2015

  • Initialization delay shortened

Version 2.42

May 26, 2015

  • Minor fixes

Version 2.39

May 16, 2015

  • New module: ADS

Version 2.41

May 14, 2015

  • Global/Global Settings/Record Analysis Start
  • Imperial unit in basic meas

Version 2.40

May 11, 2015

  • Minor fixes

Version 2.38

March 11, 2015

  • Minor fixes

Version 2.37

January 21, 2015

  • Minor fixes

Version 2.36

January 13, 2015

  • New data type: record
  • Export of all meases in a set to csv

Version 2.35

December 12, 2014

  • Number of used ac channels in point list
  • Channel number in meas list

Version 2.34

October 21, 2014

  • Export of runup trends

Version 2.33

September 19, 2014

  • Up to 8388608 samples is time waveform
  • Up to 3276800 lines in spektrum

Version 2.32

September 18, 2014

  • New coherence vizualization in fresp graph
  • New runup mode - time or revolution
  • Export to uff - all meases in history

Version 2.29

July 11, 2014

  • Virtual unit: up to 4 SABs possible to connect to one PC

Version 2.27

April 24, 2014

  • Selectable runup trend time axe - real time, relative (Global/Runup/Trend Time Axe)
  • Parameter "Trend Length" from "Global/Global Settings" removed to "Global/Runup"
  • Integration enabled in octave spectrum
  • Selectable y-axe in octave spectrum (linear, logaritmic, decibel)
  • Total mass in balancer (Balancer/Total Mass)
  • Parameter fmin is possible to set to any value greater than one even if integration used
  • Ord cursor in spec graph (frequency / speed frequency)
  • Voltage units allowed for g-demod
  • New image in balancer: overhung rotor for 2 planes
  • Serial number in virtual unit's licence file name
  • Export of trend data into csv file
  • Headers in csv files

Version 2.25

March 3, 2014

  • New detect type of wideband: AVG
  • Help in instrument (Global/Help)

Version 2.24

January 29, 2014

  • Runup trend divided into parts with selectable length (Global/Runup)

Version 2.22

October 11, 2013

  • "Enter Speed" item for set: you can enter the speed before measurement
  • Tacho sensor: pulses per rotation as floating point number
  • "Stop if ICP Error" in global settings
  • "Route START Button" in global settings: "start next" enables immediate start of measuring on next point
  • "Graph Lines" in spectrum graph properties (Graph Properties): drawing spectrum methods (continuous / discrete)
  • Fresp: amplitudes view ("Graph Properties/Fresp View")
  • Clock on screen
  • New date format - mm/dd/yyyy + time displayed with a.m./p.m.
  • Project list: time of last modification displayed on status bar
  • Runup trend: x-axe notes in format hh:mm:ss
  • Amplitudes ratio in phase shift
  • Polar graph in phase shift
  • Screenshots (Global/Screenshot)

Version 2.21

September 9, 2013

  • Trends during measurement
  • New data type: phase shift
  • New type of trigger: manual sequential (same as manual but waits between averages)
  • Phase in spectrum
  • Dynamic factor in Balancer
  • Recorder cursor in absolute time
  • Envelope changed to Demod

Version 2.20

June 7, 2013

  • Button "Save" for settings dialogs
  • Integration in orbit
  • Envelope measurements: ENV fmin minimal value decreased to 5Hz (instead of 100Hz)

Version 2.19

May 27, 2013

  • New module: Bump Test
  • Spectrum: time signal view, editing of parameters of spec windows ("Graph Properties/Spec View")
  • RMS and 0P values in time signal graph
  • Total value in spec graph
  • Stethoscope: setupable playback speed
  • Speed period view in time signal, orbit, ACMT and cepstrum (Graph Properties/Speed Period...)
  • Bearing faults view in time signal, ACMT and cepstrum (Graph Properties/FTF Period...)
  • Synch Table in spectrum (Graph Properties/Synch Table)

Version 2.18

March 25, 2013

  • Zoom spectrum

Version 2.17

January 15, 2013

  • Periodic cursor in ACMT
  • Setupable edge for external trigger ("Global/Trigger Settings/External Trig Edge")
  • Clear Last Data in set (point)

Version 2.16

December 3, 2012

  • Longer time waveform (up to 1M samples)
  • Free memory indicator during record acquisition

Version 2.15

November 23, 2012

  • New data type: cepstrum
  • New detect types of wideband: Crest and Kurtosis
  • Sound playback during the record analysis
  • Data export to uff ("Meas/Save to uff")
  • Data export to wav ("Meas/Save to wav")
  • Data export to csv ("Meas/Save to csv")
  • Saving instrument settings as profile ("Global/Profiles")
  • Tacho sensor settings replaced from "Global/Trigger Settings" to "Sensors/Tacho"
  • Route: "Measurement is not completed" notification
  • Bearing and ISO 10816 settings for each channel ("Sensors/AC1 - AC4")
  • Menu "Sensors/All Bearings": same bearing for all channels
  • Menu "Sensors/All ISO": same ISO for all channels
  • Export analyzer project to runup ("Project/Export to runup")
  • Export runup project to analyzer ("Project/Export to analyzer")
  • Button "Find": finds item in list
  • User defineable graphs colors ("Global/Global Settings/Background Color - Create")
  • Balancer: remove balancing masses ("Balancer/Basic Settings/Balancing Masses")

Version 2.14

June 18, 2012

  • Evaluation of ISO 10816 divided to A, B, C, D
  • Continuous record preview
  • Remote desktop control
  • New data type: octave analysis
  • New data type: sound level
  • New data type: equivalent sound level
  • New module: octave analysis
  • Trigger settings: new item Pulses per rotation

Version 2.13

March 26, 2012

  • Enter value of cursor position by number possible ("Graph Properties/Cursor Position")
  • Orda and aps view in RMS, 0P, PP ("Graph Properties/Detect Type")
  • ICP channels powered permanently, shorter measurement initialization
  • Balancer: balancing vector in balancing protocol
  • Peak hold averaging
  • Record preview during analysis
  • FASIT: ISO 10816
  • Graph wideband: ISO 10816 settings and limits displayed if used
  • Envelope measurements: ENV fmax minimal value decreased to 200Hz (instead of 1600Hz)
  • Statistics of static trends ("Graph Properties/Statistics Table")

Version 2.12

February 6, 2012

  • Speed control replaced by Trigger control
  • Balancer: new settings dialogs
  • Balancer: recomended trial calculation
  • FASIT: new settings dialog
  • Lubri: new settings dialog
  • FASIT: harmonics displayed as triangles bellow axe

Version 2.11

January 5, 2012

  • Virtual unit

Version 2.09

November 28, 2011

  • Centerline values A,B,X,Y displayed together
  • DC gap channel in ac channel settings + orbit with gaps ("Sensors/DC gap channel")

Version 2.08

November 9, 2011

  • Spec cascade: first in front or last in front view ("Graph Properties/Order Z")
  • New mode: Lubri
  • Selectable record analysis speed: fast or real time ("Global Settings/Record analysis speed")

Version 2.07

September 30, 2011

  • New mode: FASIT
  • Balancer: advisor removed
  • Balancer: keep trial in two planes possible

Version 2.06

August 10, 2011

  • Time cursor in orbit
  • VA4_DISC check during startup
  • Export of records to WAV ("Project/Export to WAV")
  • Selectable range of phase -180°,180° or 0°,360° ("Global Settings/Phase range")
  • Bearing database + bearing faults view in spec ("Global/Bearing Settings") + ("Graph Properties/Bearing Faults")

Version 2.05

June 28, 2011

  • New mode: stethoscope

Version 2.03

May 16, 2011

  • Temporary change settings of sensors in records ("Sensors")

Version 2.02

April 22, 2011

  • Graphs with axes and grids
  • Graphs alignment ("Global Settings/Align Graphs")
  • New cursor types: harmonic, periodic, delta, sideband ("Graph Properties/Cursor")
  • Orda trends
  • Export of records ("Project/Export")
  • Text notices ("Project/Notices")
  • ISO 10816 alarms ("Global/ISO Machine Settings")
  • Spec peak list ("Graph Properties/Peak List")
  • Spec view in RMS, 0P, PP ("Graph Properties/Detect Type")
  • Fresp: time signal view, editing of parameters of spec windows ("Graph Properties/Fresp View")
  • Cursor movement linear or maxs ("Global Settings/Cursor Type")
  • Background colors of graphs ("Global Settings/Background Color")

Version 2.01

February 23, 2011

  • First release