Versionshinweise - A4500 - VA5 Pro

Version 2.78

26.07.2021

  • 16 bit wav encoding (see manual MENU / SETTINGS / Global Settings / Wav Encoding)
  • Limits multipliers (enables to increase or decrease limits) and Acc fmin in FASIT (see manual FASIT / FASIT Settings)
  • Adash limits enabled for velocity measurement with fmin lower than 10 Hz (see manual Analyzer / Meas Menu / Limits / Adash Limits)
  • Adash limits enabled for acceleration measurement with fmin higher than 500 Hz (see manual Analyzer / Meas Menu / Limits / Adash Limits)
  • IR Camera warming up (see manual IR Camera / Warming Up)

Version 2.77

01.07.2021

  • IR Image Correction (see manual IR Camera / IR Image Correction)

Version 2.76

19.05.2021

  • Limit values for static measurements (see manual Analyzer / Meas Menu / Limits)
  • New measurement type - complex Smax (see manual Analyzer / Complex Smax)
  • Minimum and Maximum values during averaging (see manual Analyzer / Edit Measurement / Avg)
  • ADS: changing channel without losing readings (see manual ADS / ADS Settings / Measurement Definition)
  • New feature - Stethoscope easily accessible from Menu / Stethoscope

Version 2.75

02.02.2021

  • Runup minimum and maximum speed (see manual Global properties / Trigger Settings)
  • Negative Averaging (see manual Global properties / Trigger Settings / Negative Averaging)
  • Negative Averaging in Bump Test (see manual Bump Test / Settings / Negative Averaging)
  • Balancer: circumferential distance of balancing mass (see manual Balancer / Single plane balancing / RUN2 - the RESULT Screen)
  • Route status symbols like VA3 (✓, !, .) (see manual Route / Route Status)
  • Marking of non-exported routes (see manual The Route / Route measurement)
  • Battery percent in About dialog (see manual Global properties / The About...)
  • Export bump test to analyzer (see manual Bump Test / Analyse)

Version 2.74

23.11.2020

  • New "Advanced Balancer" module (see manual Advanced Balancer)

Version 2.73

15.07.2020

  • Adjustable Limits in the route (see manual Route / Limits)
  • IR Camera: Calibration (see manual IR Camera / Buttons / Calibration)
  • Balancer: Unbalance value displayed (see manual Balancer / Single Plane Balancing)
  • Balancer: The "Remove trial" item in basic settings menu (see manual Balancer / Basic Settings)
  • ADS: Vibration scale in animation (see manual ADS / ADS Settings / Vibration Scale)
  • ADS: Zoom and move using touch screen (see manual ADS / Buttons for Machine View / Zoom)

Version 2.72

25.05.2020

  • Adjustable order in amp+phase measurement (see manual The Analyzer mode / amp+phase measurement)
  • Adjustable order in phase shift measurement (see manual The Analyzer mode / Phase shift measurement)
  • Adjustable resolution in orders measurement (see manual The Analyzer mode / orders measurement)

Version 2.71

28.04.2020

  • Calculator (see manual MENU / Run / Calculator)
  • Physical unit and frequency range in bump test (see manual Bump Test / Settings)
  • Graph unit for spectra (see manual Analyzer / Graph Properties / Graph Unit)
  • Screenshots in lossless png format instead of jpg (see manual MENU / RUN / Screenshot
  • Bearing fault frequencies: BSF2 instead of BSF (see manual Analyzer / Graph Properties / Bearing Faults)
  • Back and Forward buttons in Help window (see manual MENU / RUN / Help)

Version 2.70

13.12.2019

  • MCSA module (see manual MCSA)
  • Adjustable FASIT limits (see manual FASIT / Setup)
  • Sensor's name (see manual MENU / Settings / AC sensors / Name)
  • Value type (RMS, 0-P, P-P) defined globally (see manual MENU / SETTINGS / Spectrum Settings / Detect Type)