Release Notes - A4300 VA3 Pro

Version 1.32

August 21, 2024

• Export trend to csv (see manual Analyzer / Export)
• Balancer report in csv format (see manual Balancer / Balancer Menu / Report (csv))
• Fast sampling in amp + phase (see manual Analyzer / New Meas (Advanced) / Sampling)

Version 1.31

December 15, 2023

• Oversampling (higher sampling frequency defined by user) (see manual Analyzer / New Meas (Advanced) / Fsampling)
• Finishing Averaging (see manual Analyzer / New Meas (Advanced) / Avg)
• Retrig in route (see manual Route / Route Meas Mode)
• Trigger edge can be defined for tacho / external sensor (see manual Main menu / Tacho / External)
• External trigger edge and level removed from trigger menu and united with tacho sensor (see manual Main menu / Tacho / External)
• Sensors list import (see manual Main menu / AC Sensors / Sensors list import)
• Angles Counting marks (see manual Main menu / Global / Angles Counting)

Version 1.30

December 22, 2022

• Angles (phases) with or against rotation (see manual Main menu / Global / Angles Counting)
• Balancing: new design and terminology (see manual Balancer)
• Balancing: operating speed parameter (see manual Balancer / Balancer Menu / Rotor Settings / Operating Speed)
• Balancing: trial weight position (see manual Balancer / Single Plane Balancing / Trial Run)
• Balancing: more than 255 values in averaging available
• Sensor's name and notes added to csv export (see manual Analyzer / Meas Menu / Export to csv)
• Flat top window (see manual Analyzer / New Meas / New Meas (Advanced) / Window)
• Import of basic meas list (see manual Analyzer / New Meas / New Meas (Basic))
• Peaks list in spectrum graph (see manual Analyzer / Graph Properties / Peaks List)
• Relaxed restrictions of highest sampling frequency (see manual Analyzer / New Meas / New Meas (Advanced) / Fmax)

Version 1.29

August 5, 2021

• Limits for static measurements in Analyzer (see manual The Analyzer mode / Next Meas functions / Limits)
• Limits for static measurements in Route (see manual The Route mode / Limits)
• Limits multipliers (enables to increase or decrease limits) and Acc fmin in Meter (see manual Meter / Meter Settings)
• Limits multipliers and Acc fmin in FASIT (see manual FASIT / FASIT Settings)
• Total Mass in Balancer (see manual The Balancer / Project Menu / Total Mass)

Version 1.28

April 1, 2021

• Eeaster Egg - Snake game
• Balancer: Unbalance value displayed (see manual The Balancer / Single Plane Balancing)
• New language - Turkish

Version 1.27

February 28, 2020

• Frequency range up to 90 kHz (see manual The Analyzer mode / New Meas / New Meas (Advanced) / Fmax)

Version 1.26

December 12, 2019

• Adjustable FASIT limits (see manual FASIT / Settings)
• Sensor's name (see manual Main menu / AC sensors)
• Value type (RMS, 0-P, P-P) defined globaly (see manual Main menu / Global)
• Channel switching during measurement in meter mode (see manual Meter / Sensors Settings)
• Channel switching during measurement in fasit mode (see manual FASIT / Sensors Settings)
• Actual date displayed together with actual time in status bar

Version 1.25

August 7, 2018

• New highest resolution (speed / 1024) is available for balancing and 1x ampl + phase measurement (see manual The Analyzer mode/New Meas/New Meas (Advanced)/Resolution)
• Lower "Band fmin" than 10Hz is available for FASIT (see manual FASIT/Settings/Band fmin)
• New language support - French

Version 1.24

June 19, 2018

• Spanish language version added
• ACMT detect type RMS or PEAK (see manual The Analyzer mode/ACMT measurement)
• More than 255 averages enabled
• New parameter "Advanced" in menu Global (see manual Main menu/Global)
• The upper line contains more information about displayed graph.
• Export to csv (see manual The Analyzer mode/Export/Export to csv)

Version 1.21

January 18, 2018

• Point change while measured data are displayed (see manual The Route mode/The Route buttons description)
• "Save Data" Dialog (see manual Main menu/Global)
• The Start / Stop / Save button in analyzer mode changed to Start / Stop

Version 1.19

September 26, 2017

• Minor fixes

Version 1.18

September 18, 2017

• Minor fixes

Version 1.17

August 22, 2017

• The Start / Stop / Save button in analyzer mode (see manual The Analyzer mode/The Analyzer buttons description/The F3 button (Start / Stop / Save))

Version 1.16

August 4, 2017

• Minor fixes

Version 1.15

July 10, 2017

• Easy access strobo mode (see manual Strobo/Easy Access)
• Auto-forward to next point in the route (see manual Main menu/Global/Route Auto Forward)
• Images in balancer (see manual The Balancer/Project Menu/Balancer Settings)
• Graphic for balancer result (see manual The Balancer/Single plane balancing/RUN 2 - the RESULT screen)
• "Remove trial mass" question after trial run (see manual The Balancer/Single plane balancing/RUN 2 screen – Measurement with trial)
• Different number of blades for each plane (see manual The Balancer/Project Menu/Balancer Settings)
• Balancing mass splitting (see manual The Balancer/Single plane balancing/RUN 2 - the RESULT screen)
• Change of blades (see manual The Balancer/Single plane balancing/RUN 2 - the RESULT screen)
• Various correction mass radius for each plane (see manual The Balancer/Project menu/Rotor Settings))

Version 1.14

May 16, 2017

• Time synchro averaging for spectra (see manual The Analyzer Mode/New Meas/New Meas (Advanced)/Averaging)
• Ampl Tacho (see manual Main menu/Trigger/Use Ampl Tacho)
• Clear last data (see manual Analyzer/Functions for set)
• Manual entry of DC values (see manual The Analyzer Mode/New Meas/New Meas (Advanced)/Manual entry)
• Predefined texts while entering names

Version 1.13

March 28, 2017

• Alarm value "none" enabled (Meter/Settings/Alarms)
• Page Up / Page Down (see manual, chapter: How to work with the menu and lists/Lists)

Version 1.12

February 21, 2017

• Reference spectrum recalculated according to value type (RMS, 0P, PP)

Version 1.11

January 27, 2017

• Detection of tacho trig level (Menu/Sensors/Tacho)
• Ultrasound data type

Version 1.10

November 16, 2016

• Minor fixes

Version 1.09

October 26, 2016

• Ultrasound module
• Route sensors checking (Menu/Global/Check Route Sensors)

Version 1.08

September 22, 2016

• New data type: record
• Notes
• Reference values
• Manual entry
• Strobo: divide/multiply frequency by 2
• Setupable settling prolongation (Menu/Sensors/Settling Prolongation)
• Balancer: negative value of trial mass enabled (removing mass)
• Background color black/white (Menu/Global/Background Color)

Version 1.07

June 17, 2016

• The runup mode
• Averaging types for static values (linear, maximum, minimum, median)
• Detect types for static values (crest, kurtosis, avg)
• Saving data in route faster
• Low frequency cut off for g-demod spectra

Version 1.05

May 13, 2016

• Speed Detection
• New appearance of FASIT
• FASIT as meas type
• True and Scaled detect types
• Peak hold averaging
• Ir temperature data type

Version 1.04

March 21, 2016

• The Recorder Mode

Version 1.03

February 19, 2016

• The Meter Mode
• Text recommendations in FASIT

Version 1.02

December 4, 2015

• First release